Need help?Do you have a question about the Argon 18 GALLIUM CS DISC 322A and is the answer not in the manual?
General| Brakes | Shimano 105 hydraulic disc |
|---|---|
| Wheels | Vision Team 30 |
| Chain | Shimano HG601 |
| Saddle | Prologo Kappa RS |
| Wheel Size | 700c |
| Frame | Gallium CS Disc carbon |
| Fork | Carbon |
| Groupset | Shimano 105 |
| Crankset | Shimano 105 |
| Cassette | Shimano 105 R7000, 11-34T |
| Tires | Vittoria Zaffiro Pro 700x25c |
| Shifters | Shimano 105 |
| Front Derailleur | Shimano 105 |
| Rear Derailleur | Shimano 105 |
| Seatpost | Argon 18 Carbon |
Install the 3D headset according to the pressfit guide, selecting from three height options.
Assemble seat post collar, applying carbon paste and tightening bolt to 4 Nm.
Select and align the rear derailleur hanger using a specialized alignment gauge.
Route mechanical derailleur cables, housing, and hydraulic brake hoses through frame guides.
Route Di2 electronic wires and hydraulic brake hose using oblong guides and plugs.
Install the Di2 battery into the seatpost using the holder (38446) and apply grease.
Route wireless electronic hydraulic brake hose through frame holes and manage wires.
To Next Page