Do you have a question about the Argon 18 Dark Matter and is the answer not in the manual?
Frame Material | Carbon |
---|---|
Wheel Size | 700c |
Brake Type | Disc |
Drivetrain | 1x or 2x |
Tire Clearance | Up to 45mm |
Bottom Bracket | BB86 |
Axles | 12mm Thru-Axle |
Seatpost Diameter | 27.2mm |
Brakes | Hydraulic disc |
Groupset | Shimano GRX |
Seatpost | 27.2mm |
Weight | Approx. 9.5 kg (varies with size and configuration) |
Fork | Carbon |
Lists essential tools required for bicycle assembly and maintenance procedures.
Details essential spare parts to have on hand for emergency repairs and common needs.
Details specifications for brakes, tire clearance, seat post, bottom bracket, headset, and chainring.
Verifies all parts are present, inspects frame for defects, and records serial number prior to assembly.
Provides guidance on using alignment gauges and applying grease, carbon paste, and threadlocker.
Diagrams showing frame and component parts with associated SKU numbers for visual reference.
Comprehensive list of frame parts, SKUs, quantities, and descriptions for ordering and assembly.
Details applying grease, assembling the seat post collar, and tightening the screw to 4Nm.
Instructions for adjusting seatpost height and tightening the clamp to the specified torque.
Provides maximum and minimum saddle heights based on frame size and rider measurements.
Explains how to calculate required seatpost length and lists minimum insertion and maximum cut limits.
Details flipping the clamp, applying grease/carbon paste, and inserting saddle rails for offset adjustment.
Instructions for tightening bolts to 4.5Nm to secure the saddle rail and set the angle.
Steps for installing a regular rear derailleur hanger with specified torque and threadlocker.
Steps for installing a direct mount rear derailleur hanger with specified torque and threadlocker.
Instructions for applying grease, mounting the front derailleur hanger, and tightening screws to 3Nm.
Procedure for installing the FD plug to cover the hole in a single chainring setup.
Steps for installing headset plastic sleeves and pressing the assembly for the 25mm 3D headset option.
Details routing dropper post housing through the frame for AXS or mechanical 1x builds.
Steps for installing the fork with a 25mm 3D headset, including bearings and compressor ring.
Instructions for fork installation with a 0mm headset, noting SRS topcap replacement and cable routing.
Procedure for selecting and installing the chain catcher for dual chainring systems, torqued at 3Nm.
Instructions for installing an M5 plug over the chain catcher hole for single chainring configurations.
Steps for applying grease, mounting the downtube protector, and tightening screws to 3Nm.
Guides securing racks/fenders at dropouts and seatstays, specifying screw insertion and torque.
Details rack mounting on chainstay bridge and overall screw torque specifications with grease application.