Do you have a question about the Argon 18 Grey Matter and is the answer not in the manual?
Details front and rear brake rotor size and mount thickness for optimal performance.
Maximum tire clearance for 700c and 650b wheels, with and without fenders.
Specifies seat post diameter and seat post collar diameter for compatibility.
Identifies the bottom bracket as BB86 (Press-fit) for proper installation.
Lists headset model and bearing dimensions for correct fit and function.
Provides maximum chainring size and optimization for gravel cranksets.
Verifies all necessary frameset parts and bolts are present before assembly.
Inspects frame for cosmetic issues and records serial number for reference.
Ensures derailleur hanger is straight for accurate shifting performance.
Instructions for applying grease, carbon paste, and threadlocker to specific components.
Identifies the Grey Matter frame and fork models with their specific SKU numbers.
Lists SKU numbers for various frame components and indicates separately available parts.
Comprehensive list of frameset components with A18 SKU numbers and quantities.
Lists optional components available for separate order with their corresponding SKU numbers.
Steps for assembling the seatpost collar, applying grease to screws.
Adjusts seatpost height and tightens clamp screw to 4Nm, respecting insertion limits.
Table shows maximum and minimum seatpost insertion depths for each frame size.
Attaches rear derailleur hanger with threadlocker and torque, then aligns it.
Discusses seattube diameter and options for mounting a front derailleur.
Installs the 0mm headset bearing directly into the headtube.
Assembles 3D headset with columns using grease, sleeve, and headset press.
Routes rear brake housing through downtube to headtube and attaches to chainstay.
Instruction to slide foam liners onto brake housing for protection or noise reduction.
Guides front hydraulic hose through the fork leg and out the steerer tube.
Routes front and rear gear cables through the frame and attaches rear cable with ties.
Ensures correct housing order and uses cable ties for secure routing.
Details using frame cable stops for SRAM or older Shimano front derailleurs.
Explains bypassing frame cable stops for newer Shimano front derailleurs.
Notes that eTap groupset installation requires no specific cable routing.
Routes Di2 derailleur cables through seattube and connects them to the battery.
States frame compatibility with Di2 but notes it is not optimized for the groupset.
Installs Di2 battery holder, battery, and cover using screws and Loctite.
Attaches the rear derailleur cable to the drive side chainstay guide with cable ties.
Connects Di2 wires to junction box and slides it into downtube from headtube.
Uses fishing cable to guide battery and derailleur cables through frame holes.
Installs mechanical cover, applies Loctite, and inserts battery cable into seattube.
Inserts battery into seatpost and attaches rear derailleur cable to chainstay guide.
Installs cable cover on seattube and downtube holes when not using a dropper post.
Guides dropper post housing through downtube and seattube cable cover.
Installs bottom bracket cable guide after routing all cables, ensuring correct placement.
Shows correct cable placement within the guide for Mech, eTap, and Di2 setups.
Applies grease to bearing surfaces and installs bottom (MR127) and top bearings.
Inserts fork steerer and routes wires/hosing through headtube and top bearing.
Refers to internal routing compatibility documentation for cockpit setup.
Illustrates water bottle placement options on frames of different sizes.
Warns of potential chain interference with lower bottle for road groupsets.
Ensures correct screw insertion at dropouts to prevent chain interference.
Specifies thread length and insertion limits for seatstay and chainstay mounts.
Details torque specifications and grease application for rack and fender screws.
Specifies thread insertion limits for upper, interior, and exterior front mounts.
Details torque and grease application for front rack and fender mounting screws.