Need help?Do you have a question about the ARGON18 NITROGEN and is the answer not in the manual?
Install rear derailleur cable housing from drive side drop-out to top tube.
Install front derailleur cable housing under bottom bracket shell.
Install rear brake cable housing using supplied Jagwire KEB housing.
Use a brake cable and metal cable end to fix the Di2 cable.
General| Fork | Carbon |
|---|---|
| Frame Sizes | XXS, XS, S, M, L, XL |
| Brakes | Disc |
| Wheel Compatibility | 700c |
| Wheel Size | 700c |
| Drivetrain | Mechanical / Electronic |
| Groupset | Shimano or SRAM |
| Tire Size | 28mm |
| Frame Material | Carbon Fiber |
To Next Page
