Argos 1926925 - Fittings and Tools; Fittings List; Tools Required for Assembly

Please check you have all the fi ttings listed below
3.0x20mm Chipboard screw x2
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings
may be supplied than are required.
M6 Ø10x14mm Barrel nut x6
B
E
4.0x30mm Chipboard screw x46
C
10x45mm Dowel x30
D
Components - Fittings
M6x55mm Connecting bolt x1 6.3x50mm Assembly screw x24
F
ø10mm Cover cap plastic x28
M
H
ø7mm Cover cap plastic x46.3x90mm Assembly screw x26
G
ø10/ø6.3x15mm Spacer Plastic x1
N
70x40,5x20mm Angle x2
No. 4008-022
i
Tools required
Phillips
screwdriver
(medium)
Allen key
4mm incl.
Flatblade
screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
No. 4033-004
15.5x3mm Bracket x2
No. 4007-023
KJ L
O
4
No. 3901-40030
No. 3930-10045
No. 3913-06055
No. 3922-06014
No. 3901-30020
No. 3909-63050
No. 3938-00010-2
No. 3938-00007-2
No. 3909-63090
No. 3940-00015
ø8mm Cover cap plastic x4
ø8/M6x15mm Sleeve nut x1M6x100mm Connecting bolt x6
No. 3938-000081-2
No. 3923-06015
No. 3913-06100