Argos 1926925 - Step 4: Attach Bedside and Safety Rails; Step 5: Attach Bedside and Safety Rails (Repeat)

Assembly Instructions
Step 4
Attach the bedside
12
and the safety rails
9
and
10
to end boards
fi rstly by placing the
dowels in the holes in
end boards.
The thin rail attached to
the bedsides should face
inwards.
Push barrel nuts
B
into the small holes in
the bedside
12
and the
safety rail
9
, the groove
on barrel nut
B
should
be horizontal.
Push connecting bolts
J
through each leg
11
to
meet barrel nuts
B
and
then fasten with the Allen
Key.
Attach the safety rails
10
to the leg
11
with
assembly screws
G
.
Attach the bedside
12
and the safety rails
7
to end boards fi rstly by
placing the dowels in
holes in endboards.
The thin rail attached to
the bedside should face
inwards.
Push barrel nuts
B
into
the small holes in the
bedside
12
the groove
on barrel nut
B
should
be horizontal.
Push connecting bolt
J
through each leg
11
to
meet barrel nut
B
and
then fasten with the Allen
Key.
Attach the safety rails
7
to the leg
11
with
assembly screws
G
.
Ladder can be
positioned left or right.
Step 5
6
12
9
10
10
B
B
B
B
B
B
11
11
J
J
J
J
G
G
B
B
B
J
J
G
12
7
7
11
11
9
12
12
J
G
B
J
G
B