Assembly Instructions
13
L
Step 21
Attach the
strap to the unit
Attach the
strap to the wall
Wall fixing
(not supplied)
Washer
Strap
Strap
WasherWasher
Screw
O
O
Example
Screw
(not supplied)
Fit the 2 overbalance
protector kits
To prevent possible
overbalancing this unit
must be secured to a
suitable wall by fitting of
the 2 overbalance
protector kits , 1 at
each side the unit.
Wall fixings are not
supplied as they will
need to suit the wall
type.
Note:
Take care when
drilling the wall that you
do not drill into any
pipes, wires etc.
If in doubt, consult an
expert.
O
WARNING!
In order to prevent overturning
this product must be used with the
2 wall attachment devices provided
See the next page for a guide
to wall mounting and fixings
To Next Page
