with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
5. BATTERY TOOL USE AND CARE
a) Recharge only with the charger specied
by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of re
when used with another battery pack.
b) Use power tools only with specically
designated battery packs. Use of any other
battery packs may create a risk of injury and re.
c) When battery pack is not in use, keep it
away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause burns or a re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, ush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
6. SERVICE
a) Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
DRILL SAFETY WARNINGS
1. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
3. Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting a
“live” wire may make exposed metal parts of the
power tool “live” and could give the operator an
electric shock.
ADDITIONAL SAFETY RULES
FOR DRILL
1. Remove the battery pack from the drill before
carrying out adjustments.
2. Do not expose to rain or water.
3. Do not store the battery pack in temperatures
over 40
o
C.
4. Always charge the battery pack between
temperatures 0
o
C to 30
o
C. Ideal charging
temperature is 18
o
C to 24
o
C.
5. Only use the charger and the battery pack
provided no others.
6. Avoid short circuit of the battery pack
connections (screws & nails).
7. Do not incinerate or burn the battery pack, it
may explode.
8. Do not charge a damaged battery pack.
9. Replace any damaged supply cords on your
charger.
10. Always disconnect the charger power supply
before making or breaking the connections to the
battery pack.
11. Battery pack and charger will be warm during
charging this is normal.
12. When not in use, remove a charged battery
pack from the charger.
13. Always remove the battery pack from
the charger immediately after re-charging is
completed.
14. Your drill and battery pack will be warm when
working, this is normal.
15. Do not dispose of batteries in re, or with
household waste. Return exhausted batteries to
your local collection or recycling point.
16. Always check walls, oors and ceilings for
hidden power cables and pipes.
17. Accessories and metal parts can become very
hot.
WARNING: If a small amount of
electrolyte should leak from the battery
To Next Page
Loading...
