TECHNICAL DATA
Type CDI114G4 (CDI -designation of machinery, representative of Cordless impact Drill )
Voltage 14.4V
No load speed 0-700/min
Impact rate 0-10500bpm
Number of clutch positions 21+1+1+1
Max torque 15N.m
Chuck capacity 10mm
Charging time 3-5hr
Charger Input 100-240V~50/60Hz,0.2A
Charger output 18V
370mA
Max. drilling capacity
Steel 8mm
Wood 18mm
Masonry 8mm
Machine weight 1.22kg
Battery capacity 1.3Ah Li-ion battery
For the technical data of the types, the number of cells and the rated capacity of the batteries that can
be charged, please refer the nameplate of the battery pack supplied by ARGOS.
NOISE INFORMATION
A weighted sound pressure L
pA
= 71.6dB(A)
A weighted sound power L
wA
= 82.6dB(A)
K
pA
&K
wA
3.0dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete
Vibration emission value a
h,ID
= 18.04m/s²
Uncertainty K = 1.5m/s²
Drilling into metal
Vibration emission value a
h,D
= 2.16m/s²
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
To Next Page
Loading...
