Argos Malibu - Drill Door Handle Hole

Assembly Instructions
21
Step 40
IMPORTANT
Carefully choose which hole you will need to drill
Drill the handle hole
in the door
Important: Please follow
these instructions
carefully.
Lay the door down
onto a smooth surface.
Important: Carefully
choose which hole you
need to drill.
Check that the holes and
hinges are in the same
place as the diagrams.
Note: We recommend
the use of a small piece
of waste wood, placed
behind the hole while
drilling, to reduce the
possibility of any
breakout.
Using the pilot hole in
the rear face of the door,
. drill through the hole
indicated opposite, using
a 2.5mm diameter drill.
Turn the door over
and open out the 2.5mm
hole that you have just
drilled by drilling back
through it with a 5mm
drill.
15
15
15
Note: Drill bits
are not provided
Small piece of
waste wood
ONLY drill
this hole
15