Argos Malibu - Assemble Drawer Base and Back; Attach Drawer Handle and Wedgefixes

Assembly Instructions
5
Step 4
R
R
Fit the drawer base
Slide the drawer base
down the grooves in the
drawer sides and
and down into the
groove in the drawer
front .
Step 5
Fit the drawer back
Fit the drawer back
between the drawer
sides and .
Make sure that the
drawer base fits into
the groove in the drawer
back .
Hold the drawer back
in position and tap the
knock-in pegs
through the holes in the
drawer sides and .
Step 6
22
17 18
14
14
19
17 18
22
19
19
R
Attach the handle
Attach a handle to the
drawer front using
screw .
Note: Do not
overtighten the screw.
M
F
14
17 18
Step 7
Fit the wedgefixes
Turn the drawer
assembly over and slide
2 wedgefixes into the
front and back grooves,
as shown, and tighten up
the screws.
T
R
R
T
T
T
22
17
18
19
17
18
22
M
F
14