Argos Malibu - Prepare Filer Panels

Assembly Instructions
6
Step 8
B
B
D
Prepare the file front
and the file back
Screw 2 metal dowels
into the holes shown on
the back of the file front
. .
Screw 2 metal dowels
into the holes shown on
the file back .
Note: Tighten the metal
dowels up fully against
the panels.
B
12
16
Prepare the file sides
Insert 2 small locking
nuts into the holes
shown on each of the file
sides .
Note: The arrow on the
locking nut must point
towards the hole in the
edge of the panel.
Assemble the file
front and file sides
a: Push 2 file sides
onto the back of the file
front as shown.
b: Turn the 2 small
locking nuts on the
file sides clockwise
to secure them - more
than 1/2 a turn.
Step 9
Step 10
B
D
D
B
D
20
20
B
20
12
D
20
a:
b:
B
B
x 2
D
12
16
20
20
20
20
12
12
Small groove