EasyManua.ls Logo

ARH FREEWAYCAM - MAINTENANCE; STORAGE

ARH FREEWAYCAM
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 15/18
FreewayCAM Install Guide
MAINTENANCE / STORAGE
The cameras are designed to operate 24/7/365 under all weather conditions without the need
for special maintenance. Please keep the front of the camera clean. During the cleaning process,
make sure that you do not scratch the front cover.
Never use the camera without its sun-shield in a hot environment, because it was specially
designed to provide proper air-cooling.
The cameras should be stored in a low humidity environment in the temperature range of -35
°C to + 55 °C. Always use the sealing caps on the connectors to keep the camera unit waterproof.
Not using the caps will void the warranty.
The maintenance of the devices is recommended on a quarterly basis. In case of extreme weather
conditions, maintenance should be performed more frequently.
During maintenance, make sure that:
the camera operates properly,
it is facing in the previously set direction,
the fastenings are not loose,
the front of the camera and the camera itself is clean (no spider webs or any other
contaminants inhibit the visibility),
the mechanical components and parts are not damaged in any way