FOR MODELS: JGW, JGR AND JGJ SECTION 7 - APPENDICES
PAGE 7 - 6 1/01
CL. = Clearance
CU = Cubic
CYL = Cylinder
= Centerline
DNFT = Digital No-Flow Timer Switch
ESNA = Registered Trade Mark of Elastic Stop Nut Division, Harvard Industries
HE = Head End
HEX = Hexagon
MAWP = Maximum Allowable Working Pressure
MAX. = Maximum
MIN. = Minimum
N/A = Not Applicable
NO. = Number
NPT = National Pipe Thread
PEEK = Poly-Ether-Ether-Ketone plastic material
% = Percent
PIST = Piston
P/N = Part Number
SAE = Society of Automotive Engineers
SG = Specific Gravity
SI = International System, as applied to the modern metric system
S. N. or S/N = Serial Number
TFE = Teflon
THD = Thread
TIR = Total Indicator Reading
TPI = Threads Per Inch
TRAV = Travel
UNC = Unified (Inch) National Coarse Screw Threads
UNF = Unified (Inch) National Fine Screw Threads
UNL = Unloader
VOL = Volume
W/ = With
C
L
To Next Page
Loading...