To Next PageTo Next Page
Need help?Do you have a question about the Ariel JGQ and is the answer not in the manual?
General| Brand | Ariel |
|---|---|
| Model | JGQ |
| Category | Air Compressor |
| Language | English |
Detailed frame specifications for JGI, JGM, JGP, JGN, and JGQ models.
Table of critical clearances for various components of the compressor.
Specifications for new piston and packing ring side clearances.
Required fastener tightening torque values for proper assembly of compressors.
Procedures to ensure proper alignment of main bearing bores for longevity.
Requirements and procedures for proper alignment between the compressor and driver.
Procedure for aligning the compressor considering thermal growth differences.
Comprehensive list of items to check for safe compressor starting.
Forms for ensuring successful start-up and Ariel warranty coverage.
Definition of MAWP and requirements for compressor cylinders.
Procedures for filling the oil sump and priming the lube oil system.
Instructions for setting lubricator pumps to the break-in rate.
Guidelines for changing lubricating oil and filter based on intervals or analysis.
Procedures for collecting and analyzing oil samples for suitability.
Specifications for available lube system monitors like Proflo and Kenco.
Integrating Proflo PF1 pulse output and alarm circuit with control systems.
Steps to protect electronic equipment during arc welding operations.
Description and operation of the DNFT for sensing no-flow conditions.
Details on the tri-metal bearing, its installation, and wear determination.
Guide to maintenance frequency based on environment, loads, and gas cleanliness.
Common problems and their possible causes during compressor operation.
