FOR MODELS: JGI, JGM, JGN, JGP AND JGQ SECTION 1 - DESIGN SPECIFICATIONS & DATA
9/08 PAGE 1-7
Important Safety & Data Information
CAUTION
SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN
RESULT IF PRESSURE SYSTEM IS NOT COMPLETELY
VENTED BEFORE LOOSENING THE BOLTS ON FLANGES,
HEADS, VALVE CAPS, OR PACKING. CONSULT ARIEL
TECHNICAL MANUAL BEFORE PERFORMING ANY
MAINTENANCE.
CAUTION
SEVERE PERSONAL INJURY AND PROPERTY DAMAGE
WILL RESULT IF SUCTION AND DISCHARGE VALVES ARE
NOT INSTALLED IN THEIR PROPER LOCATION.
CAUTION
NOISE GENERATED BY RECIPROCATING MACHINERY CAN
BE A SOURCE FOR HEARING INJURY. SEE PACKAGER’S
INFORMATION FOR ANY SPECIFIC RECOMMENDATIONS.
WEAR HEARING PROTECTION WHEN UNIT IS RUNNING.
CAUTION
HOT (OR COLD) GAS TEMPERATURES ESPECIALLY THE
CYLINDER DISCHARGE AREAS, 190°F (88°C) OIL AND HIGH
FRICTION AREAS CAN BE A SOURCE FOR BURNS OR
FROST BITE. WEAR PROPER INSULATION WHEN WORKING
AROUND THESE AREAS. SHUT DOWN UNIT AND ALLOW TO
COOL (OR WARM) BEFORE DOING MAINTENANCE IN THESE
AREAS.
!
!
!
!
To Next Page
Loading...
Need help?
General
