GB - 30
Unit throws
snow poorly
or does not
throw snow.
1. Shear bolts broken.
2. Attachment clutch/brake
not adjusted properly.
3. Auger is frozen in place.
4. Ice or debris is
obstructing auger.
5. Attachment drive belt
slipping, worn or
damaged.
1. Replace shear bolts (see Shear
Bolts on page 20).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment on page 24).
3. Move unit to a warm place to
thaw.
4. With the engine off and auger
disengaged, check for
obstructions and remove.
5. Adjust or replace attachment
drive belt (see Attachment
Clutch/Brake Adjustment on
page 24).
TROUBLESHOOTING
PROBLEM PROBABLE CAUSE CORRECTION
To Next Page
Loading...
