Quick Start Guide
Sno-Tek 28E (920403 s/n 35000 & up)
• Step 1: Unfold Handlebar
• Step 2: Install Discharge Chute
• Step 3: Install Discharge Chute Crank
• Step 4: Install Remote Deflector Cable
• Step 5: Check Function of Dual Handle Interlock
• Step 6: Check Tire Pressure
• Step 7: Check Auger Gearcase Oil
• Step 8: Check Engine Crankcase Oil
• Step 9: Fill Engine Fuel Tank
• Step 10: Start Engine
• Step 11: Stop Engine
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
IMPORTANT: READ OPERATOR’S MANUAL AND ENGINE MANUAL
THOROUGHLY AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES
BEFORE OPERATING.
To Next Page
Need help?
General
