Need help?Do you have a question about the Ariens 935335 42" and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Drive Type | Rear-Wheel Drive |
| Cutting Width | 42 inches |
| Deck Material | Steel |
| Cutting Height | 1.5 - 4.5 inches |
| Warranty | 3 years limited |
Essential practices for safe operation of the tractor, covering general use.
Key instructions for safe tractor operation, including hazard awareness and control usage.
Specific safety guidelines for operating the tractor on slopes and inclines.
Interpretation of DANGER, WARNING, and CAUTION symbols and their implications.
Guidance on basic tractor operation procedures.
Procedure for setting the desired cutting height for the mower deck.
Explanation of the ROS feature and its operation.
Procedures for starting the engine in various weather conditions.
Identification and function of major tractor controls.
Procedure for engaging and ensuring the parking brake is secure.
Steps for safely engaging and using the ROS feature.
Instructions for safely stopping the engine and mower blades.
Instructions for engaging and operating the mower blades.
Guidance on operating the throttle for optimal engine performance.
How to control the tractor's direction and speed using the motion control lever.
Critical safety precautions and techniques for operating on slopes.
Pre-start checks including engine oil and fuel.
Advice and techniques for optimal mowing performance.
Guidance on engine oil, filters, and air system maintenance.
Crucial safety warning before performing any service or adjustments.
Instructions for leveling the mower deck for optimal cutting.
Procedure for jump-starting the tractor engine with a weak battery.
Instructions for adjusting the mower deck's front-to-back pitch.
Common causes and solutions when the engine fails to start.
Troubleshooting steps for an engine that is difficult to start.
Solutions for when the engine does not crank or turn over.
Diagnosing and fixing issues causing clicking but no engine start.
Troubleshooting causes for reduced engine power.
Identifying and resolving causes of excessive tractor vibration.
Troubleshooting the operator presence system.
Diagnosing and fixing causes of uneven grass cutting.
Solutions for when the mower blades fail to spin.
Troubleshooting issues with grass clippings discharge.
Critical warning about operating safely on slopes and avoiding hazards.
To Next Page
