Ariens Classic LM 21 User Manual

Owner/Operator Manual
Manuel Du Propriétaire/Utilisateur
04502200 2/12
Printed in USA
ENGLISH
FRANÇAIS
Gasoline containing up to 10% ethanol (E10) or up to 10% MTBE (methyl tertiary butyl ether) is acceptable
for use in this machine.
The use of any gasoline exceeding 10% ethanol (E10) or 10% MTBE will void the product warranty.
Il est possible d’utiliser de l’essence contenant jusqu’à 10% d’éthanol (E10) ou 10% de MTBE (éther
méthyl-tertiobutylique) sur cette machine.
L’utilisation d’une essence contenant plus de 10% d’éthanol (E10) ou de 10% de MTBE annulent la
garantie.
Models
911170 – LM21 Classic
911192 – LM21 Classic
911193 – LM21S Classic
911194 – LM21SW Classic
Walk Behind Lawn Mower

Ariens Classic LM 21 Specifications

General

Cutting Width	21 inches
Drive Type	Push
Deck Material	Steel
Starting System	Recoil
Engine Type	4-cycle
Wheel Size	8 inches (front)
Warranty	2 years

Summary

INTRODUCTION

THE MANUAL

Guide to reading manuals for safety instructions and understanding controls.

ENGINE MANUAL

Reference to the separate manual for engine-specific service recommendations.

SERVICE AND REPLACEMENT PARTS

Guidance on identifying model/serial numbers for parts and service inquiries.

DEALER DELIVERY

PRODUCT REGISTRATION

UNAUTHORIZED REPLACEMENT PARTS

DISCLAIMER

SAFETY

SAFETY ALERTS

Explanation of safety alert symbols, signal words, and their meanings.

PRACTICES AND LAWS

Adherence to safe working practices, awareness of conditions, and local laws.

REQUIRED OPERATOR TRAINING

Necessity of providing the manual and training to any new unit operator.

SAFETY DECALS AND LOCATIONS

DANGER AND CAUTION MESSAGES

Explains critical safety messages and warnings for operation and their locations.

EMISSION CONTROL SYSTEM

Information on emission controls and compliance with EPA and CARB regulations.

OPERATIONAL SAFETY RULES

Rules for safe operation, including sharing the manual and age restrictions.

ASSEMBLY

CARTON CONTENTS

Lists the components included in the mower's shipping carton.

ASSEMBLY STEPS

Step-by-step instructions for assembling the lawn mower unit.

CONTROLS AND FEATURES

CONTROL IDENTIFICATION

Visual identification and numbering of the mower's various controls and features.

HANDLEBAR ADJUSTMENT

Instructions on how to adjust, fold, and secure the handlebars.

OPERATION

CONTROLS AND FEATURES OVERVIEW

Explanation of key controls like engine/blade control, handlebar, and starter.

CUTTING HEIGHT ADJUSTMENT

Instructions for adjusting the cutting height levers for desired grass length.

MAINTENANCE

MAINTENANCE SCHEDULE

A schedule outlining service tasks like checks, cleaning, and changes at intervals.

CHECK ENGINE/BLADE CONTROL

Specific check for engine/blade control functionality and stopping time.

SERVICE AND ADJUSTMENTS

SERVICE POSITION

Method to place the unit for easier access to the underside of the deck.

DRIVE BELT REPLACEMENT

Detailed steps for removing and reinstalling the drive belt on self-propelled models.

HANDLEBAR HEIGHT

Instructions for adjusting the handlebar height and folding for storage.

STORAGE

CLEANING AND INSPECTION

Procedures for cleaning, inspecting, and preparing the mower for storage.

FUEL SYSTEM PREPARATION

Steps to treat the fuel system with stabilizer for extended storage.

TROUBLESHOOTING

COMMON PROBLEMS AND SOLUTIONS

A guide to identify and correct common issues like starting problems or poor cut.

SERVICE PARTS

SPECIFICATIONS

CONSUMER LIMITED WARRANTY

WARRANTY COVERAGE DETAILS

Information on warranty periods, product groups, and special extensions.

CUSTOMER RESPONSIBILITIES

Owner's responsibilities for registration and performing maintenance for warranty.

EMISSION CONTROL WARRANTY

EVAPORATIVE EMISSION CONTROL SYSTEM WARRANTY

Details warranty rights and obligations for the evaporative emission control system.