GB - 36
SPECIFICATIONS
Model Number 911703
Description PRO 24HWSP
Length – in. (cm) 60 (152.4)
Height – in. (cm) 39 (99)
Width – in. (cm) 24 (61)
Actual Weight – lbs (kg) 152
Cutting Width – in. (cm) 24 (61)
Cutting Height – in. (cm)
2 – 4
(5.1 – 10.2)
Engine, 4 cycle
Briggs & Stratton
Professional Series
EPA/CARB Compliant
Engine Model
Ready Start
8.50 Gross Torque
Max Rotation Speed of Cutting
Edge – feet per minute
15,400
Governed RPM (May be
different from maximum rpm.)
3,200 ± 100
Displacement Cu. In. (cc) 12 (190)
Cylinder Bore Cast Iron Sleeve
Engine Oil Type See engine manual.
Crank Case Capacity – Oz.
(Liter)
20 (0.59)
Oil System Full Pressure
Engine Oil Filter Spin-On
Spark Plug Gap – in. (mm) See engine manual.
Fuel Type Unleaded
Fuel Tank Capacity – qt (Liter) 1 (0.95)
Primer Bulb N/A
Choke N/A
Throttle Cable-Actuated
Air Cleaner Paper Element with Foam Pre-cleaner
Starting Recoil
Variable Speeds – MPH
(km/hr)
0 – 4.7 mph
Mower Deck 11 Gauge - Stamped Steel
Front Wheel Dia – in. (cm) 8 (20.3)
Rear Wheel Dia – in. (cm) 20 (50.8)
Rear Tire Pressure – psi (kPa) 35 (241)
To Next Page
Loading...
