To Next Page
R
Reginald SpenceAug 2, 2025
What to do if my Ariens ST 928 Snow Blower will not crank?
- EErica ClineAug 3, 2025
If your Ariens Snow Blower will not crank, the suggested solution is to charge the battery or replace it.
What to do if my Ariens ST 928 Snow Blower will not crank?
If your Ariens Snow Blower will not crank, the suggested solution is to charge the battery or replace it.
General| Type | Two-Stage |
|---|---|
| Clearing Width | 28 inches |
| Drive Type | Wheel Drive |
| Number of Forward Speeds | 6 |
| Number of Reverse Speeds | 2 |
| Intake Height | 21 inches |
| Auger Type | Serrated Steel |
| Electric Start | Yes |
| Engine | Ariens AX |
| Starting System | Electric/Recoil |
| Chute Control | Remote |
| Skid Shoes | Yes |
Explains the meaning of safety alert symbols and their role in conveying precautions.
Defines DANGER, WARNING, and CAUTION signal words and their associated hazard levels.
Details safe procedures for positioning the unit for maintenance and repairs.
Comprehensive safety guidelines covering operation, work area, unit, slopes, child safety, personal safety, and controls.
Details on placing the unit in belt service and on-end service positions for maintenance.
Provides instructions and safety precautions for safely filling the fuel tank.
Safety warnings and step-by-step instructions for replacing the traction drive belt.
Safety warnings and procedures for replacing the attachment drive belt.
Covers adjustments for discharge chute deflector, runners, scraper blade, and chute crank.
Details on how to properly adjust the attachment clutch linkage for correct operation.
A chart to diagnose engine problems, listing possible causes and corrective actions.
Step-by-step instructions for safely removing the engine from the snow-thro unit.
Step-by-step instructions for properly installing the engine onto the unit.
Step-by-step guide for removing the auger and impeller assembly from the housing.
Safety precautions and instructions for replacing shear bolts securing the auger.
