EN - 4
NOTATIONS
NOTE: General reference information for
proper operation and maintenance practices.
IMPORTANT: Specific procedures or
information required to prevent damage to unit
or attachment.
PRACTICES AND LAWS
Practice usual and customary safe working
precautions, for the benefit of yourself and
others. Understand and follow all safety
messages. Be alert to unsafe conditions and
the possibility of minor, moderate, or serious
injury or death. Learn applicable rules and
laws in your area.
REQUIRED OPERATOR TRAINING
If unit is to be used by someone other than
original purchaser, loaned, rented or sold,
ALWAYS provide this manual and any needed
safety training before operation.
SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged Safety
Decals. Refer to (Figure 2) below for Safety
Decal locations.
1. DANGER! TO AVOID SERIOUS
INJURY OR DEATH
DANGER: IMMINENTLY
HAZARDOUS SITUATION! If
not avoided, WILL RESULT
in death or serious injury.
WARNING: POTENTIALLY
HAZARDOUS SITUATION! If not
avoided, COULD RESULT in
death or serious injury.
CAUTION: POTENTIALLY
HAZARDOUS SITUATION! If
not avoided, MAY RESULT in
minor or moderate injury. It may
also be used to alert against
unsafe practices.
Read the Operator’s Manual.
Always wear protective
glasses, goggles or a face
shield.
Always wear adequate
hearing protection.
Do not operate when
children or others are
around.
Remove objects that could
be thrown by the cutter line.
Keep body parts away from
rotating cutter line.
05230800B
To Next Page
Loading...
Need help?
General
