19
HC
INSTRUCTIONS FOR USE
How to fill the boiler tank before use
DO NOT CONNECT THE POWER CORD
PLUG TO THE MAINS SOCKET.
Unscrew safety cap and, using funnel, pour
into the tank two measures of water to the
maximum level. Screw safety cap back on
again.
BEFORE UNSCREWING THE TANK CAP,
ALWAYS ENSURE THAT THE CLEANER
IS SWITCHED OFF AND DISCONNECTED
FROM THE POWER SUPPLY.
How to start the appliance
To turn on the appliance, insert the power cord plug into an electrical socket and press
ON/OFF switch; green indicator and amber indicator will come on. As soon as amber
indicator goes out, the appliance is ready for use. To prevent steam from being dispensed
accidentally, always move the cursor from left to right ( ). To release this lock, move
the cursor from right to left ( ).
In any case, both when first using the cleaner
and every time it is left unused for a few minu-
tes, press steam supply button and discharge
any water that has formed in hose into a con-
tainer. Then, as soon as the cleaner begins sup-
plying steam only, direct the steam jet towards
the floor and press steam supply button at least
two or three times.
To Next Page
Loading...
