arimar CLASSIC 270 - Boat Assembly Procedure

71
SEPTEMBER 2021
ENGLISH
3.2 Boat assembly procedure
To assemble the inflatable boat properly, strictly observe the following
procedure, according to the model:
PROCEDURE
MODEL
1°
Check the package content
(refer to the list of the package content indicated
in section 1)
CLASSIC 270-320-360
SOFT LINE 270
2°
Unfold the tubes in the inflating position
CLASSIC 270-320-360
SOFT LINE 270
3°
Assemble floorboard/keel
CLASSIC 270-320-360
SOFT LINE 270
4°
Inflate the floorboard
SOFT LINE 270
5°
Inflate the keel
CLASSIC 270-320-360 (*)
SOFT LINE 270 (*)
6°
Install oars
CLASSIC 270-320-360
SOFT LINE 270
* The keel is already in the right position.