EasyManuals Logo

Ariston 100 Series User Manual

Ariston 100 Series
Go to English
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
EN
13
11. It is normal that water drips from the overpressure safety device
when the appliance is heating. For this reason, the drain must be
connected, always left open to the atmosphere, with a drainage
pipe installed in a continuous downward slope and in a place free of
ice.
12. Make sure you drain the appliance and disconnect it from the power
grid when it is out of service in an area subject to subzero tempera-
tures.
13. Water heated to over 50 °C can cause immediate serious burns if
delivered directly to the taps. Children, disabled persons and the
aged are particularly at risk. We recommend installing a thermostat-
ic mixer valve on the water delivery line, marked with a red collar.
14. Do not leave ammable materials in contact with or in the vicinity of
the appliance.
15. Do not place anything under the water heater which may be dam-
aged by a leak.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ariston 100 Series and is the answer not in the manual?

Ariston 100 Series Specifications

General IconGeneral
Voltage230 V
Frequency50 Hz
Heating ElementCopper
Capacity100 L
Maximum Working Pressure8 bar
Tank MaterialEnameled steel
InsulationPolyurethane

Related product manuals