What to do if air sensor is not working in Ariston Water Heater?
If the air sensor in your Ariston Water Heater is malfunctioning, it could be due to: * A faulty component. If the component is faulty, replace it. * Incorrect positioning. Place the component in the right position.
Why is my Ariston 80 L Water Heater frequently using electrical resistance?
If your Ariston Water Heater is frequently using electrical resistance, it could be because: * The “Time W” value is too low. Increase the availability of heating time. * The air temperature is out of range. * It has not been 8 days since the first installation, a change of the Time-W parameter, a power outage, or if the P7 parameter is set to OFF and the outside air temperature is below 10°C. Wait 8 days and recheck.
What to do if my Ariston Water Heater is leaking?
If you notice water leaking from your Ariston Water Heater, it could be due to several reasons: * Improperly tightened pipes: Ensure all pipe connections are secure. * Damaged gasket: Replace the gasket if it's broken. * Incorrectly tightened flange: Check and tighten the flange bolts. Additionally, excessive dripping might occur due to high water temperature, high water pressure, a missing expansion vessel, a blocked drainage hole, or a broken drainage pipe. If necessary, install an expansion vessel, clean the valve hole, or replace the discharge pipe. Also, if the Pro-Tech anode malfunctions due to low water hardness, replace it and ensure proper water hardness. If the product is full of water and power is not supplied, replace the device and ensure proper installation.
Why is my Ariston Water Heater producing boiling water?
If your Ariston Water Heater is producing boiling water or steam from the taps, it could be due to: * A faulty component. If the component is faulty, replace it. * Incorrect positioning of a component. Place the component in the right position. * High level of scaling in the boiler and components. Ensure water with proper hardness degree. * A malfunctioning component. If the component is faulty, replace it.
What to do if Ariston 80 L has insufficient water flow?
If you are experiencing insufficient water flow from your Ariston Water Heater, it could be due to: * Low water network pressure. * A faulty component. If the component is faulty, replace it. * Clogging due to high water hardness, limescale, or dirt. Clean the component and ensure proper water hardness and clean water. * Obstructions in the water circuit. Ensure proper installation.
How to fix a fan issue in Ariston 80 L Water Heater?
If the fan in your Ariston Water Heater is not working, it could be due to: * A broken fan capacitor or motor. If the component is faulty, replace it. * Damaged or badly connected wirings. If the component is faulty, replace it or place the component in the right position. * Physical impediments blocking the fan blades. Clean the component. * Broken blades. If the component is faulty, replace it.
What to do if the display on my Ariston 80 L Water Heater is not working?
If you are experiencing problems with viewing the display or the display turning off on your Ariston Water Heater, check the mains power supply.
How to fix a noisy Ariston 80 L?
If your Ariston Water Heater is making increased noise, check and clean the fan and other moving parts for internal obstructions that could be causing the noise. Also, check the components connected using mobile clamps, ensuring the screws are well tightened, because some components could be vibrating.
Why is the heat pump on my Ariston Water Heater not working properly?
If your Ariston Water Heater has a reduced heat pump operation and the electrical heating element is almost always on, consider that this component depends on climatic conditions. Ensure the product is powered with the correct voltage. Check the evaporator, grille, and conduits to ensure they are clean, because the evaporator could be obstructed or frozen. Also, check the display for error messages related to the heat pump circuit.
Why does my Ariston 80 L Water Heater take so long to heat up?
If your Ariston Water Heater is taking a long time to heat water, it could be due to: * Functioning in “Green” mode during cold weather. Set the mode to “Auto”. * A faulty component. Replace the component if faulty. * Incorrect positioning of a component. Place the component in the right position. * Clogging due to ice, leaves, or dirt. Clean the component. * Broken components or damaged wirings. Replace the faulty component. * Bad wiring connections. Place the component in the right position.
General| Power Source | Electric |
|---|---|
| Pressure Rating | 8 bar |
| Capacity | 80 L |
| Type | Storage Water Heater |
| Warranty | 2 years |
| Thermostat | Adjustable |
Covers crucial safety precautions for installation, use, and maintenance of the appliance.
Explains symbols, appliance field of use, and relevant technical requirements and standards.
Details product certifications, accessories, transport, and handling guidelines.
Covers identification, operating principle, construction, dimensions, diagrams, and data.
Covers installer qualifications, essential warnings, and safety regulations for installation.
Step-by-step guide for appliance installation, connections, and commissioning.
User safety warnings, recommendations for use, and initial start-up procedures.
Guidelines for Legionella prevention and types of hot water installation.
Overview of the control panel, its functions, and the available operating modes.
Details Night Function, Cooling Function, Condensation Warning, and Time Setting.
Guide to accessing the information menu and adjusting installer parameters.
Covers anti-legionella, default settings, anti-freeze, defrost, and error handling.
Instructions for setting up and registering the Wi-Fi module for app connectivity.
Guidance on user maintenance, troubleshooting common issues, and appliance disposal.
To Next Page
