EasyManua.ls Logo

Ariston AURES M 10.5 - User Manual

Ariston AURES M 10.5
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
RUS
UA
EN
INSTANTANEOUS ELECTRIC WATER HEATER
KZ
GE
ƤƞƠƝǝƣƶƤƞƣƫƩƪƬ۶ƴƠƝƴƩҲƴƱƴ
ࡵࢁࡲࡻࡲ࡮ࡺࡲ࡮ࡴ࡮ࡿࡼࡺࡷࢆࢁࡴࡲࡻ࡬ࡪࡵࡪࢄ࢈࡮ࡴ࡮࡫࡮ࡴࡲ
ƨƩƧƫƧưƦƴƢƶƤƞƣƫƩơưƞƪƣơƢƛƧƝƧƦƙƜƩƞƛƙƫƞƤƵ
ƨƩƧƫƧưƦơƢƞƤƞƣƫƩơưƦơƢƛƧƝƧƦƙƜƩǝƛƙư

Questions and Answers

  • G
    Gary TranAug 8, 2025
    What to do if Ariston AURES M 10.5 Water Heater has no hot water despite fully open hot water faucet?
    • J
      Jesse OwensAug 8, 2025
      If there is no hot water even when the hot water faucet is fully open, first, check the circuit breaker and voltage at the wiring block to ensure there is electrical power. Also, the activation flow rate needed to turn on the heating element might not have been reached. Try cleaning the filter screen, turning the circuit breaker off, opening the hot valve to release pressure from the unit, and then turning the circuit breaker back on.
  • W
    William SmithAug 12, 2025
    Why Ariston AURES M 10.5 switch off during use?
    • K
      katherine49Aug 12, 2025
      The Ariston Water Heater might switch off during use due to an interruption of the mains electrical supply. Check the incoming power supply, MCB, switches, and supply cabling. It could also be due to an ELSD trip, possibly caused by earth leakage. In this case, check for earth leakage and reset the ELSD. If the problem persists, call your local authorized distributor for assistance.
  • B
    bburtonAug 18, 2025
    How to fix Ariston AURES M 10.5 water not hot enough?
    • V
      Valerie SalasAug 18, 2025
      If the water from your Ariston Water Heater is not hot enough, it could be due to several reasons. First, too much water might be flowing through the heater; try reducing the flow rate via the outlet tap. Second, a reduction in the ambient temperature may be the reason, so switch to a higher temperature setting. Third, the water pressure might be below 100 kPa; check if the mains stop valve is fully open and that there are no other restrictions in the supply line. Finally, an electrical malfunction could be the cause, in this case, have the heater unit checked by a qualified electrician or contact your local authorized distributor.
  • G
    Gabriel ClarkAug 23, 2025
    Why does Ariston AURES M 10.5 Water Heater water temperature varies from hot to cold during use?
    • R
      Rachel MatthewsAug 23, 2025
      If the water temperature from your Ariston Water Heater varies from hot to cold during use, it is likely that the water pressure has dropped below the minimum level. Increase the hot water supply to resolve this issue.
  • V
    virginia18Aug 28, 2025
    What to do if Ariston AURES M 10.5 water is too hot?
    • M
      Matthew SummersAug 28, 2025
      If the water from your Ariston Water Heater is too hot, it could be due to not enough water flowing through the heater; try increasing the flow rate via the outlet tap. Also, an increase in the ambient temperature may be the reason, so switch to a lower temperature setting.
  • E
    Elizabeth FloydSep 1, 2025
    What to do if Ariston Water Heater water ceases to flow?
    • M
      Michael ReeseSep 1, 2025
      If water ceases to flow from your Ariston Water Heater, it could be due to a blockage of the spray head or a twisted/blocked flexible shower hose. Clean or replace the spray head and check for free passage of water through the hose, replacing it as necessary. Another reason could be no water supply, so check the water supply, ensure the stop valve is open, and verify there are no blockages.

Summary

General Safety Instructions

Safe Installation and Usage Practices

Covers proper installation, usage, and electrical hookup guidelines to prevent damage and injury.

General Safety Standards

Specific Safety Warnings and Risks

Lists detailed warnings and associated risks for appliance operation, handling, and maintenance.

Technical Characteristics

Installation Instructions

Water and Electrical Connections

Details water filter, inlet/outlet, pressure valve, aerator, electrical hookup, and grounding.

Installation Best Practices and Warnings

Illustrates correct/incorrect installation, electrical safety warnings, and inlet restrictions.

Operating Instructions

Appliance Activation and Temperature Control

Explains how to start the appliance, adjust power settings, and regulate water temperature.

Troubleshooting Guide

Water Temperature and Flow Issues

Solutions for problems related to water temperature and flow rate.

Electrical Wiring Diagrams

Ariston AURES M 10.5 Specifications

General IconGeneral
Power10.5 kW
Water Flow Rate5.5 L/min
InstallationWall-mounted
Water Connection1/2"
Temperature ControlElectronic
TypeElectric Water Heater
Safety FeaturesEarth leakage circuit breaker (ELCB)

Related product manuals