Need help?Do you have a question about the Ariston NIMBUS PLUS 40 S EXT and is the answer not in the manual?
General| Model | NIMBUS PLUS 40 S EXT |
|---|---|
| Type | Air-to-Water Heat Pump |
| Energy Efficiency Class (Heating) | A++ |
| Energy Efficiency Class (Cooling) | A+ |
| Refrigerant | R32 |
| COP | 4.2 |
| EER | 3.8 |
| Max Flow Temperature | 60°C |
| Heating Capacity | 10.0 kW |
| Power Supply | 230V |
Essential safety precautions, warnings, and key symbols for safe installation and use.
Product compliance with EU directives and WEEE disposal regulations.
Description of the NIMBUS PLUS system, including external unit models and dimensions.
Technical specifications, weights, and dimensions of the internal unit.
Information on the system interface, its technical data, and the outdoor sensor.
Guidance on pre-installation checks, site selection, and minimum installation distances.
Detailed procedures for connecting refrigerant pipes and water circuits.
Instructions for electrical connections, circuit diagrams, and terminal block layouts.
Guide to installing, positioning, and operating the Sensys system interface.
Explanation of display symbols, buttons, LED indicators, and parameter setup.
Configuration of temperature control for heating and cooling zones, including temperature ranges and slopes.
Settings for Heat Pump operation, Energy Manager functions, and input/output configurations.
Essential maintenance tasks, general system checks, and user guidance.
Explanation of the system's frost protection mechanisms for external and internal units.
Comprehensive lists of internal and external unit error codes with troubleshooting steps.
Explanation of the data contained on the internal and external unit data plates.
To Next Page
