To Next PageTo Next Page
Need help?Do you have a question about the Ariston SD1511 and is the answer not in the manual?
Identifies the production origin and major changes for the appliance model.
Provides details on the build number, day, month, and year of manufacture.
Details the pin assignments for the control harness plug and socket.
Explains the wiring connections for the thermostat.
Outlines the wiring for the light switch.
Details the wiring for the light assembly and fan motor.
Describes the wiring for the fan (ventilator) motor.
Identifies the production origin and major changes for the appliance model.
Provides details on the build number, day, month, and year of manufacture.
Details the pin assignments for the control harness plug and socket.
Explains the wiring connections for the thermostat.
Outlines the wiring for the light switch.
Details the wiring for the light assembly and fan motor.
Describes the wiring for the fan (ventilator) motor.
This document provides comprehensive service information for Ariston Freestanding Larder Fridges, specifically covering models introduced in March 2007. These models are available in 1500mm and 1700mm heights and feature a "wet wall" design, which means defrosting is automatic, with water draining into a gutter and a dissipator. The temperature is controlled by a thermostat located behind the control panel or top fascia, where the door switch is also mounted.
A key feature across all models is the inclusion of Microban® anti-bacterial protection, integrated into the plastic of the fridge interior during manufacturing. This permanent protection helps to reduce the spread of food poisoning bacteria, minimize odors, and inhibit bacterial growth on contact with interior surfaces, offering enhanced hygiene.
For models with a "V" suffix, such as SD1711V and SD1712V, an air circulation fan is included to improve cooling performance. Additionally, models with a "J" suffix, like SD1722J, are designed to be joined or linked with a matching freezer (e.g., UP1722J). When joining these appliances, the larder fridge must always be positioned on the right-hand side, with its door hinged on the right, and the freezer on the left, with its door hinged on the left. This specific arrangement ensures that both grab handles are in the middle. The freezer's internal pipework is routed to warm its right-hand side panel, preventing condensation between the fridge and freezer due to cross-ambient temperatures. A joining kit is available for these models, and detailed instructions are provided for proper installation, including leveling each appliance separately before joining to prevent undue stress on the cabinets.
The appliance doors are reversible, but this process requires a T20 Torx key to remove the plinth or kick strip. Detailed instructions are provided for door reversal, including removing and refitting hinges, blanking plates, grab handles, and the bottom bush/closure aid. It is crucial to use the left door closure aid, which is typically supplied loose with the appliance's literature pack, when reversing the door. After reversal, it is important to check that the door closes properly, the interior light switch operates, and the door seals effectively.
Maintenance instructions emphasize safety precautions, especially when servicing refrigeration products containing Isobutane R600a refrigerant. Only trained engineers are authorized to handle, transport, store, or repair systems with this refrigerant. All servicing must be performed with the appliance disconnected from the electrical supply and preceded by earth continuity, insulation checks, and refrigerant leak detection. Personal safety measures, such as protecting against sharp edges, are also highlighted.
Specific guidelines for Isobutane R600a include:
For thermostat replacement, all new thermostats must have their capillary phial taped or insulated where it passes electrical terminations, mirroring the original fitting. This insulation must be applied before completing the work.
The stability bracket is a mandatory safety feature for all 17** fridge models and must be fitted to the wall or floor behind the appliance. Full instructions for fitting this bracket are provided in the customer instruction book.
The manual also includes detailed wiring connection charts and a theoretical wiring diagram for both Electrolux (ACC/ZEM) and Tecumseh compressors, covering components like the thermostat, compressor, capacitor (if fitted), PTC, ventilator (for 'V' models), light switch, and light assembly. This information is crucial for diagnosing and repairing electrical issues.
General| Installation | Freestanding |
|---|---|
| Number of shelves/baskets refrigerator | 3 |
| Number of shelves/baskets freezer | 1 |
| Color | White |
| Total Net Capacity | 415 L |
| Capacity | 150 liters |
| Star Rating | 4 Star |
| Ice Tray | Yes |
