Need help?Do you have a question about the Aritech Atender CS-150 and is the answer not in the manual?
General| Brand | Aritech |
|---|---|
| Model | Atender CS-150 |
| Category | Security System |
| Language | English |
Defines indicated conditions for zone indicator lights 1-8, such as AC Failure or Low Battery.
Step-by-step guide to arm the system before exiting the premises with exit delay.
Instructions for arming the system using STAY or INSTANT modes while remaining inside.
Procedure to disarm the system after entering the premises through a delay zone.
How to use key 2 to check for system trouble conditions and identify the fault.
How to use key 3 to recall and view recent alarm events and the triggering zone.
How to temporarily disable a specific zone from activating an alarm.
Procedure to re-enable previously bypassed zones and restore system functionality.
Information on obtaining and using the Master Programming Code for system configuration.
Step-by-step guide to change, add, or delete Personal Authorization Codes (PACs).
How to set up temporary access codes (e.g., PAC17) with limited uses.
Steps for altering the Master Programming Code to enhance system security.
To Next Page
