Need help?Do you have a question about the Aritech CS175 and is the answer not in the manual?
General| Operating Temperature | -10°C to +55°C |
|---|---|
| Zones | 8 |
| Battery Backup | Yes |
| Communication | PSTN, GSM |
| Humidity | 95% non-condensing |
Lists essential and optional components required for system installation.
Details safety and best practice guidelines for wiring the CSx75 system correctly.
Step-by-step guide for the fundamental installation process of the control unit and modules.
Visual representation of the overall system installation flow and connections.
Step-by-step guide for installing the control unit in a large metal enclosure.
Instructions for installing the control unit into a polycarbonate housing.
Guide for installing the control unit in a small metal enclosure.
Explains the inputs and outputs for the CS-175 control unit.
Details the inputs and outputs for the CS-275 control unit.
Illustrates the inputs and outputs for the CS-575 and CS-875 control units.
Covers the physical installation, mounting, and basic wiring procedures for keypads.
Explains wiring keypads together in multidrop, star, and combined network configurations.
Describes the dual wiring method for zones, including alarm and tamper contacts.
Explains the single wiring method for zones, separating alarm and tamper circuits.
General guidance on wiring sounders with end-of-line (EOL) protection.
Wiring diagram and terminal descriptions for the AS500 sounder.
Wiring diagram and terminal descriptions for the AS271 sounder.
Wiring diagram and terminal descriptions for the AS290/390 sounders.
Wiring instructions for 4-wire fire detectors for CS275/575/875 and CS175 models.
Wiring instructions for 2-wire fire detectors for CS275/575/875 models.
Advice on creating effective fire escape plans for households.
Wiring diagram for the CS175's open collector outputs.
Wiring diagram for the CS275's open collector outputs.
Wiring diagram for the CS575/875's relay and open collector outputs.
Procedure for automatically discovering and storing modules connected to the control panel.
Detailed steps for programming LCD keypads, including options and settings.
Instructions for programming LED keypads, covering their number, partition, and features.
Defines the hierarchical structure of the system's programmable components.
Describes numerical data (ND) and feature selection data (FSD) used in programming.
Information on using default programming settings for typical installations.
Procedure for accessing the system's programming mode.
Guide on identifying and selecting modules for programming.
How to reset the controller to its factory default settings.
Process for setting the country code to configure regional defaults.
Detailed steps for programming using an LED keypad interface.
Instructions for programming the system using an LCD keypad interface.
Overview of the software's capabilities for programming and data management.
Details the wiring requirements for connecting the control panel via RS232 cable.
Describes the meaning of LEDs on the keypad when operating in master mode.
Explains the status displays for armed and ready conditions across partitions.
Procedures for arming and disarming multiple partitions using a single code.
How to control specific areas or partitions individually from the keypad.
Steps to silence alarms when the system is operating in multi-partition mode.
Guide to configuring the DIP switches for the RX8i4-16i4 module.
Explains the meaning of the module's LED indicators for status.
Details the terminal connections and specifications for the RX8i4-16i4 module.
Steps for programming transmitters and configuring the RX8i4-16i4 module.
Best practices and procedures for programming wireless transmitters.
How to remove transmitter data from the module's memory.
Procedure for testing the functionality and signal strength of wireless transmitters.
Guide to configuring the DIP switches for the RX8w8-16w8 module.
Explains the meaning of the module's LED indicators for status.
Details the terminal connections and specifications for the RX8w8-16w8 module.
Steps for programming transmitters and configuring the RX8w8-16w8 module.
How to configure zones and assign them to partitions for wireless receivers.
Best practices and procedures for programming wireless transmitters.
How to remove transmitter data from the module's memory.
Procedure for testing the functionality and signal strength of wireless transmitters.
Guide to configuring the DIP switches for the CS216 zone expander.
Details the terminal connections and specifications for the CS216 expander.
Steps for programming the zone configuration and partition for the CS216 expander.
Explanation of the CS534's audio features like anti-lockup tone and call back mode.
Covers terminal descriptions and specifications for wiring the CS534 audio board.
How the system operates concerning two-way audio sessions.
Explains the functionality of line-hold and call back modes for the CS534.
Describes the different control levels available for managing audio sessions.
Defines the indicator tones used during two-way audio sessions.
Steps for programming the CS534 audio board parameters.
Guide to configuring the DIP switches for the CS507 output expander.
Details the terminal connections and specifications for the CS507 expander.
Steps for programming the output configuration and partition for the CS507 expander.
Covers terminal descriptions and specifications for wiring the CS586 module.
Explains the basic operation and LED indications of the CS586 module.
Steps for programming the RS232 parameters, transitions, and commands for the CS586.
Table listing module numbers for each keypad based on partition and configuration.
Table showing CS216 module numbers based on starting zone and DIP switch settings.
Table showing CS507 module numbers based on address and DIP switch settings.
Tables listing module numbers for RX8w8/RX16w8 and RX8I4 wireless receivers.
Explains the behavior of keyswitch zones in static and impulse modes.
To Next Page
