Need help?Do you have a question about the Aritech DM3000 Series and is the answer not in the manual?
General| Detection Angle | 90° |
|---|---|
| Microwave Frequency | 10.525 GHz |
| Power Supply | 9-16 VDC |
| Current Consumption | 25mA (Standby), 35mA (Alarm) |
| Input Voltage | 9-16 VDC |
| Standby Current | 25mA |
| Alarm Current | 35mA |
| Communication | Wired |
| Operating Temperature | -10°C to +55°C |
| Humidity | Up to 95% non-condensing |
| Outputs | Alarm, Tamper, Anti-Masking |
| Alarm Output | Normally Closed (NC) relay, 100mA max |
| Tamper Output | Normally Closed (NC) relay, 100mA max |
Details the DM3000 Series Intelligent Addressable Weatherproof Manual Call Point.
Lists the specific models within the DM3000 series, including options.
Guide to setting the device address using DIP switches before installation.
Step-by-step instructions for surface mounting the manual call point.
Details on connecting the loop cable to the terminal block and wire specifications.
Explains the LED indications for different device states like Alarm and Fault.
Guidelines for maintaining and testing the device according to regulations.
Procedure for replacing the resettable element or installing a breakable one.
Details operating voltage, current consumption, and rated current.
Specifies isolation voltage, reconnect voltage, and series impedance.
Covers IP rating, dimensions, operating environment, and materials.
To Next Page
