Aritech ATS4000 - Zone Uninhibition Procedures; Restoring Inhibited Zones

ATS4000 Installation and Quick Programming Guide 13
5. Alarm Group 1. Number 1. Name
8. Disable auto-uninhibit
2. Areas
3. User alarm group
4. Alarm system control
5. List areas
6. Keyboard duress
7. Reset system alarm
9. Arm & reset only
10. Disarm only
11. Alarm reset only
12. Auto inhibit active zones
13. force arming if active zones
14. Prevent forced disarming
15. Modem access
16. Alarm group restriction 1
24. No arming if alarm group restriction not timing
25. Time zones
26. Alternate alarm group
User menu options
1. Panel status 13. Start auto disarmed test
2. zone open 14. Program users
3. zone in alarm 15. Time & date
4. zone Inhibited 16. Inhibit/Uninhibit RAS/DGP
5. History 17. Enable/Disable sevice tech.
6. Test Report 18. Reset cameras
7. Service Menu 19. Install menu
8. Film counters 20. Door & floor groups
9. zone text 21. Holidays
10. Inhibit zone 22. Open door
11. Uninhibited zone 23. Unlock, lock, disable and enable
12. Test zone 24. print history
6. Timers 1. Alm/grp restriction 1 Disarmed time
2. Alm/grp restriction 2 Disarmed time
3. Alm/grp restriction 3 Disarmed time
4. Alm/grp restriction 4 Disarmed time
5. Alm/grp restriction 5 Disarmed time
6. Alm/grp restriction 6 Disarmed time
7. Alm/grp restriction 7 Disarmed time
8. Alm/grp restriction 8 Disarmed time
9. Disarm test time
10. Arm test time
11. Warning time
12. Delayed disarmed alarm
13. Suspicion time
17. Alarm group restriction 2
18. Alarm group restriction 3
19. Alarm group restriction 4
20. Alarm group restriction 5
21. Alarm group restriction 6
22. Alarm group restriction 7 - Emergency
23. Alarm group restriction 8 - Counter
14. Service time available
15. Local alarm reminder
16. Individual test mode time
17. Door unlock time
18. Testing event flag
19. Siren cut-out time
20. Mains fail delay time
21. Delay reporting of Entry/Exit alarms
22. A to B alarm delay (ACPO)
If "SKIP"