Arjo AtmosAir SAT 4000 Series User Manual (English)

Questions and Answers:

R
Richard KlineAug 11, 2025
What to do if the green lamp on my Arjo AtmosAir SAT 4000 Medical Equipment pump doesn't light up when turned on?
- N
  Nichole FranklinAug 11, 2025
  First, ensure the power cord is properly plugged into both the pump and the wall outlet. If it's plugged in, check if the wall outlet is controlled by a switch; try a different outlet. Also, verify that the circuit breaker for the outlet hasn't tripped or the fuse blown; reset the breaker or replace the fuse if necessary. If the issue persists, the power cord or switch might be damaged, in which case you should contact Arjo for assistance.
L
Laura DelgadoAug 18, 2025
What to do if my Arjo AtmosAir SAT 4000 Medical Equipment mattress is not firm?
- C
  Christopher JonesAug 18, 2025
  Check the tubing inside the mattress for loose connectors, kinks, or disconnections. Also, inspect the SAT system for any holes or damage. If you find holes or damage to the SAT system, contact Arjo for assistance.
D
Dennis LeeAug 27, 2025
Why does my Arjo AtmosAir SAT 4000 Medical Equipment mattress inflate only to one side in rotation mode?
- A
  Allen RogersAug 27, 2025
  This could be due to improperly connected or kinked tubing. Ensure the red hoses are connected to the hoses marked with a red tag for rotation. Also, check the tubing inside the mattress for any kinks or disconnections.
S
Sarah OliverSep 3, 2025
Why is my Arjo AtmosAir SAT 4000 Medical Equipment mattress too firm upon arrival?
- R
  Richard YangSep 3, 2025
  The firmness might be due to altitude differences preventing the valves from opening. Try applying weight to the mattress to open the valves. Additionally, allow the internal components up to 24 hours to adjust to the environment.