What to do if the Arjo Mobility Aid handset does not respond?
If the handset of your Arjo Mobility Aid is unresponsive, there are a few things you can check: * Ensure that the red stop button on the control box is not engaged. * Verify the connection of the handset cord. * Assess the battery condition, and replace it with a fully charged battery pack if necessary.
What to do if RAISE and LOWER buttons on Arjo Mobility Aid control box do not respond?
If the RAISE and LOWER buttons on your Arjo Mobility Aid control box aren't working, try the following: 1. Check the red stop button on the control box to ensure it's not activated. 2. Check the battery condition and replace it with a fully charged battery pack, if required.
Outlines the specific applications and environments for which the Maxi Move is designed.
Provides critical safety precautions and warnings to prevent injury and equipment damage.
Explains critical safety mechanisms like stop buttons, cut-outs, and anti-crush systems.
Step-by-step instructions for lifting patients from chairs and beds using the DPS spreader bar.
Procedures for lifting from the floor and using powered DPS and loop spreader bars.
Detailed steps for weighing patients before and after suspension in the sling.
Guidelines for safely recharging the battery pack and general battery care.
Outlines mandatory daily checks and periodic testing for lift functionality.
Solutions for common problems related to the lift's movement and controls.
Troubleshooting steps for issues with the battery charger and battery pack.
General| Safe Working Load | 227 kg (500 lbs) |
|---|---|
| Foldable | No |
| Frame Material | Steel |
| Wheel Type | Castors |
| Usage | Patient Transfer |
To Next Page
