38
Care of your Maxi Move
Adjustable Width Chassis Function: Use the control
handset or the control panel to open and close the chassis
legs to check for full and efficient movement.
General Lift Condition: Perform a general visual
inspection of all external parts, and test all functions for
correct operation, to ensure that no damage has occurred
during use.
Servicing Advice
ARJO recommends that the Maxi Move be maintained at
regular intervals. See the Maxi Move Preventive
Maintenance Schedule (ARJO Literature No.04.KM.01/
US).
Under normal use, the following items are subject to
wear: slings, batteries, straps and castors. These items
must be regularly checked as described previously, and
replaced as needed.
Parts lists and circuit diagrams are available upon
request from ARJO or its approved distributors. If
required, spare parts are available from ARJO or its
approved distributors.
Special tools are required for the replacement of certain
components. The simplest, safest and most effective way
to maintain your product is to have it methodically and
professionally serviced by an ARJO approved
representative using ARJO approved spare parts.
For information on service and maintenance contracts,
please contact your local ARJO distributor.
WARNING: If in doubt about the correct
functioning of the Maxi Move, do not use it and
contact the ARJO Service Department.
WARNING: UK LIFTS ONLY: Important
legislation came into force on 5th December
1998, which has an impact on the schedule of
service for your patient lift(s), variable height
baths and other raising and lowering
equipment. The Lifting Operations and Lifting
Equipment Regulations (LOLER) 1998 and The
Provision and Use of Work Equipment
Regulations (PUWER 98) must be satisfied by
the owner. A schedule of thorough
examinations every six months has been
developed to comply with the law. Details can
be obtained from ARJO Service UK.
To Next Page
Loading...
