ARK Tamo - Safety Instructions; Specifications

7
EN
2 Safety instructions
General
• Only use the Tamo as described in this manual.
• Do not use if visibly damaged.
Installation
• Do not mount the Tamo within 15 cm of the
corner on a masonry surface.
• Make sure the Tamo is mounted ush with the
surface and does not move.
• Make sure the masonry screws are only installed
directly into brick or concrete to maintain the
LPS1175 security certication.
• Do not install screws directly into mortar, as this
will weaken the mounting.
• Do not reuse the screws when reinstalling.
3 Specications
Product Tamo
Part number Tamo 960002
Inner dimensions
(W × H × D)
55 mm × 115mm × 21 mm
Dimensions (W × H × D) 85 mm × 160 mm × 75 mm
Weight 2.1 kg
Operating temperature -30 °C – +50 °C
Lock type Combination key pad lock
Possible combinations Over 9 million codes