BATTERY SELECTION
Now that your ArkPak is ON, the following information will guide you through the battery
selection process.
Step 1. Welcome Screen
Appears when the charger is turned ON for the first time
- Select YES if you are charging a new type of battery – Proceed to step 2
- Select NO if you have already completed setup and are charging your usual battery –
Charging will then commence
Step 2. Battery Type Selection
The ArkPak has five types of charge programs that can charge conventional 12V Lead acid ,
Calcium, GEL or AGM batteries or 12V lithium iron phosphate (LiFePO4) batteries.
Using the MENU buttons, scroll up or down to your battery type and press OK to select
CAUTION – Refer to battery label or battery manufacturer if you are unsure of your battery type,
selecting the wrong battery type may damage your battery.
page 5
To Next Page
Loading...