www.arkrayusa.com 25
Step 11
When 'EP' appears on the screen, press the < or > button. The
screen will display 'On' or 'OFF'. Press the button to confirm
the setting.
If you do not want to set the indicator, press the button while
the screen displays 'OFF'.
Turning on the Test Strip Expiration Date Indicator
NOTE
• If the preset expiration date
expires, the meter will display
‘EP’ when the test strip
is inserted.
• The display will alternate
between ‘EP’, and the date
and time when the test result
is displayed right after the test.
• If the expiration date is set to
October of 2019, the meter
will display ‘EP’ at the start of
November, 2019.
This setting allows you to turn the test strip expiration date
indicator 'On' or 'OFF'. This setting turns the function 'On' or
'OFF' only. See page 27 to set the test strip expiration date.
To Next Page
Loading...
Need help?
General
