What to do if Arkray Glucocard Shine Blood Glucose Meter result is not accurate?
If the test result from your Arkray Blood Glucose Meter doesn't match how you feel, try repeating the test with a new test strip. Also, verify the expiration date of the test strip and check the meter.
Why is the display blank on my Arkray Glucocard Shine Blood Glucose Meter?
If the display of your Arkray Blood Glucose Meter is blank after inserting a test strip, there might be a few reasons. First, ensure the test strip is inserted correctly with the contact bars facing up and is fully inserted into the test strip port. Also, make sure you're using the correct test strip. If the display is still blank, check if the batteries are inserted correctly, with the ‘+’ side facing up, or try replacing the batteries altogether.
General| Display | LCD |
|---|---|
| Test Time | 5 seconds |
| Sample Size | 0.5 μL |
| Blood Sample | Capillary whole blood |
| Operating Temperature | 10 to 40 °C |
| Measurement Method | Electrochemical |
| Measurement Range | 20-600 mg/dL |
| Battery | CR2032 |
| Operating Humidity | 10 to 90 % |
| Storage Conditions | -20 to 60 °C |
Details the system's intended application for blood glucose monitoring by individuals with diabetes.
Lists technical details such as measurement range, sample size, test time, and battery life.
Defines the environmental conditions (temperature, humidity, hematocrit) for optimal system performance.
Outlines the items included in the GLUCOCARD Shine BGM System package and optional items.
Describes the test strip's contact bars, confirmation window, and essential safety instructions for use.
Details the meter's display, test strip port, data port, and operational buttons (>> and <<).
Guides users through adjusting the meter's date and time settings for accurate record-keeping.
Explains the purpose and initial steps for using control solutions to verify meter and strip performance.
Emphasizes safe practices, infection prevention, and hygiene when using the lancing device.
Instructions on how to mark a test result as post-meal using a specific symbol on the meter.
Explains the concept of AST, suitable sites, and key differences compared to fingertip testing.
Outlines situations suitable for AST, when fingertip tests are required, and general usage precautions.
Provides general target blood glucose ranges for non-diabetic adults at different times.
Instructions on how to access and view average blood glucose results for different time periods.
How to view average blood glucose readings specifically for pre-meal tests.
How to view average blood glucose readings specifically for post-meal tests.
Details essential steps for cleaning and disinfecting the meter and lancing device to maintain hygiene.
Presents data on the system's accuracy compared to laboratory standards and user results.
Details precision studies, including within-run and total precision measurements for the meter.
Compares test results from alternative sites with fingertip results and laboratory measurements.
Outlines the warranty period, coverage, and limitations for the GLUCOCARD Shine meter.
To Next Page
