www.arkrayusa.com 17
Step 10
This mode allows you to turn the
hypoglycemia indicator (possible low
blood sugar) on or off and to select the
desired level for the indicator. You will
be alerted any time your test result is
lower than the selected level.
When “Hypo” is displayed (along with
the hypoglycemia symbol
), press
<<. The screen will display “On” or
“OFF”. Press the >> button when “On”
appears to set the desired level.
Then press << until the desired
hypoglycemic level (between 20 and 60
mg/dL) is being displayed. Then press
the >> button to confirm the level.
TurnontheHypoglycemia(HYPo)Indicator
Caution: Before the HYPo indicator is set, ask your doctor or
diabetes nurse to help you decide what your hypoglycemia
level will be.
Note: If the test result is lower than the
pre-set hypoglycemia level, the meter will
display the following.
If you do not want to set the indicator, press the >> button
while the screen displays “no”. The screen will then return to
step 2 (See page 13).
When you are done setting all the modes, turn the meter off
by pressing and holding the >> button for 3 seconds.
To Next Page
Loading...
Need help?
General
