Need help?Do you have a question about the ARKSCAN ES301 and is the answer not in the manual?
General| Light Source | LED |
|---|---|
| Operating Temperature | 0°C to 50°C |
| Input Voltage | 5 VDC |
| Interface | USB, Bluetooth |
| Scanning Technology | Laser |
| Type | Handheld |
| Connectivity Technology | USB |
| Scanning Speed | 300 scans/sec |
| Scan Rate | 300 scans per second |
| Supported Barcodes | 1D barcodes |
| Operating System Compatibility | Windows, Mac, Android, iOS |
| Operating Humidity | 5% to 85% RH (non-condensing) |
| Humidity | 5% to 85% RH (non-condensing) |
| Power Supply | USB powered |
| Storage Temperature | -20° to 60°C |
Lists actions to avoid, like exposure to high temperatures, humidity, or covering the device.
Covers eye safety from light source and stability hazards, and potential dropping risks.
Lists items included in the box, such as the scanner, CD, and quick guide.
Briefly introduces the mini wireless barcode reader and its main components.
Details performance aspects like light source, scan rate, sensor, resolution, and battery life.
Covers housing, profile, operating temperature, and supported symbologies.
Instructions on aiming the scanner beam across barcode bars and spaces for successful reading.
Steps to connect the scanner to a host PC via USB for charging.
Explains the various sounds the scanner makes and their corresponding meanings.
Describes the status lights on the scanner and their meanings.
Steps to connect the scanner using Bluetooth Human Interface Device (HID) profile.
Steps to connect the scanner using Bluetooth Serial Port Profile (SPP).
Guides through the process of setting or using a pincode for Bluetooth connection.
Displays barcode representations for digits 0-9 used in configuration.
Configures the inactivity period before the scanner powers off automatically.
Sets the scanner to remain permanently active, disabling the timeout feature.
Guidelines for pairing the scanner with smartphones and tablets.
How to activate the virtual keyboard on iOS devices using a hotkey.
Steps to ensure the Android virtual keyboard functions correctly with the scanner.
Options for wireless connectivity like BT HID and BT SPP.
Options for tethered scanning using USB-HID and USB-VCP.
Instructions to activate data storage in memory when connection is lost.
Instructions to deactivate data storage and revert to real-time transmission.
Resets scanner configuration to factory defaults.
How to cancel or abort a current configuration or scan operation.
Displays the scanner's firmware version information.
Disables all audible beeps from the scanner.
Enables audible beeps for scanner feedback.
Scanner activates only when the trigger is pressed.
Scanner activates on trigger press and stays active until pressed again.
Scanner beam flashes briefly for aiming.
Scanner beam is continuously active.
Scanner beam is continuously active but powers off after a set time.
Configuration for English (USA) and English (UK) keyboard layouts.
Configuration for French and Canadian (Traditional) keyboard layouts.
Configuration for German, Italian, Spanish, Japanese, and Norwegian layouts.
Configuration for Swedish and Portuguese keyboard layouts.
Configuration for Czech (QWERTY/QWERTZ) and Hungarian (QWERTZ/101 KEY) layouts.
Configuration for Swiss (German/French) and Belgian (AZERTY) layouts.
Configuration for Dutch, Danish, and Slovak keyboard layouts.
Configuration for Brazilian (Portuguese) and Alt Code layouts.
Enables all supported barcode symbologies on the scanner.
Enables individual barcode types like Code 32, Code 93, IATA, etc.
Appends a Carriage Return character after each scanned barcode.
Appends a Line Feed character after each scanned barcode.
Appends both Carriage Return and Line Feed characters.
No terminator character is appended after scanned barcodes.
Appends Space or Tab characters as terminators.
How to find and display the scanner's current firmware version.
Activates internal flash memory storage for scanned data.
Deactivates internal flash memory storage.
Steps to output stored data wirelessly after enabling memory mode.
Steps to output stored data via USB-VCP connection using a driver.
Removes only the most recently scanned record from memory.
Deletes all stored records from the scanner's memory.
Sets the structure of scanned data, including item number, date, time, and barcode data.
Configures the character used to separate data fields in the output.
Configures the format for the date, e.g., YYYY-MM-DD.
Configures the format for the time, e.g., HH:MM:SS.
Lists and explains the various date formats (DD/MM/YYYY, MM/DD/YY, etc.) available for configuration.
Lists and explains the various time formats (HH:MM:SS, HH:MM) available for configuration.
Test barcode for Code 39 symbology.
Test barcode for Interleaved 2 of 5 symbology.
Test barcode for Code 128 symbology.
Test barcode for EAN symbology.
To Next Page