- 27 - - 28 -
DATA FORMAT
Example: To set Date to 2012-08-01 (Year-Month-Day):
1. Scan [
Set Date
]
2. Scan [1], [2], [0], [8], [0], [1] on page 9 & 10.
3. Scan [
Set Date
]
Example:
To change Data Format to
<Item No.>, <Barcode Data>, <Date>, <Time>
1. Scan [
Data Format
]
2. Scan [1], [4], [2], [3] on page 9.
3. Scan [
Data Format
]
The default Data Format is
<Item No.>, <Date>, <Time>, <Barcode Data>
below are items and their setup codes:
Example: To set Time to 08:10:30 am (Hr:Min:Sec)
1. Scan [
Set Time
]
2. Scan [0], [8], [1], [0], [3], [0] on page 9 & 10.
3. Scan [
Set Time
]
For memory version only
. R006$
*.R006$*
SET DATE
. R007$
*.R007$*
SET TIME
Default is comma ( , ) . You may replace it with any alphanumeric
characters from the full ASCII table in User’s Manual (on CD).
Example: To change Field Separator to Semicolon ( ; )
1. Scan [
Field Separator
]
2. Scan [ ; ] from the full ASCII table.
3. Scan [
Field Separator
]
. R010$
*.R010$*
FIELD SEPARATOR
. R011$
*.R011$*
DATA FORMAT
DATE & TIME SETUP
For memory version only
1
2
Item No.
Date
Code Item Code Item
3
4
Time
Barcode Data
* To avoid Time and Date being reset to factory default due
to running out of battery, please fully charge the scanner for
at least 3 hours before use.
To Next Page
Loading...