Arlo Q - Youre Done!; Support and Resources; Camera LED Guide; Understanding LED Indicators

13
12
You’re Done!
Congratulations! Your Arlo Q camera is set up and ready to go.
To view useful tutorial videos, find troubleshooting tips, or get
support, visit support.arlo.com.
Camera LED Guide
Solid purple
The camera is
connected to a WiFi
network. However, it
is not connected to
the Internet.
Blinking purple
The camera is too
far away from the
router.
Blinking blue/
amber
A firmware update
is in progress. DO
NOT TURN OFF THE
CAMERA.
Fast blinking
amber
The camera is not
connected to a
WiFi network yet.
Solid amber
The camera is
booting.
O
The camera is
powered o.
Slow blinking
amber
The camera is
powered on and is
ready for setup.
Solid blue
The camera is
powered on and is
connected to Arlo
servers.
Slow blinking
blue
The camera is
connecting to a
WiFi network.
Fast blinking
blue
The camera is
connecting to Arlo
servers.