See 3.5.3 Contents of the MB directory on page 3-64 for information on the images.txt file.
MCC-SMC interface not implemented
If the design does not implement the MCC‑SMC interface, you must set the variable FPGA_SMB to
FALSE in the board config.txt file. See 3.5.2 config.txt generic board configuration file
on page 3-64.
2 Hardware description
2.7 MCC-SMC interface
100765_0000_04_en Copyright © 2017–2020 Arm Limited or its affiliates. All rights
reserved.
2-34
Non-Confidential
To Next Page
Loading...
Need help?
General
