Ex- User Guide with safety notes Armadex / Ex-Machinery
Explosion Proof Camera Ex-M OZC -4- 08-06-2021
2 FOR YOUR SAFETY
2.1 General
Every person working with Ex-M OZC must have read and understood this manual
before using the camera.
Knowing and understanding the contents of this manual is a basic requirement for
protection of personnel against explosion risks, to prevent faulty operations and to use
it safely and correctly.
Any ideograms, signs and markings applied to the camera must be observed and kept
in a readable state.
2.2 Qualification of personnel
The camera may only be used by a competent person, with adequate knowledge of
explosion safety and hazardous area classification of the plant / factory. The
minimum level of know-how is basic knowledge, as described in the goals of IECEx
005-001 or comparable.
2.3 Intended use
Take pictures or make movies of equipment or installations in a hazardous area zone
2, inside or outside a plant / factory.
The battery compartment of the equipment may only be
opened or closed inside a non-hazardous area. The area
must be known to be non-hazardous to the user.
The battery or memory card may only be removed or
placed inside a non-hazardous area. The area must be
known to be non-hazardous to the user.
To Next Page
Loading...