Ex- User Guide with safety notes Armadex / Ex-Machinery
Explosion Proof Camera Ex-M OZC -6- 08-06-2021
2.6 Prohibited modifications of the camera
Repair, maintenance and/or overhaul of the camera shall only be conducted by Ex-
Machinery Explosion Proof Equipment B.V. or by a repairer qualified or authorized by
Ex-Machinery Explosion Proof Equipment B.V.
The equipment, including all equipment as supplied by
Armadex / Ex-Machinery must not be modified. Any
modification will make the ATEX EU Declaration of
Conformity invalid. The unit does not contain any
serviceable parts, and must be replaced completely at the
end of its technical life.
3 IMPORTANT NOTES BEFORE PUT INTO SERVICE
3.1 Inspection of the delivery
Unpack the camera and check for any damage. If damage is found don not use the camera,
contact shipping company and selling party immediately.
To Next Page
Loading...