Ex- User Guide with safety notes Armadex / Ex-Machinery
Explosion Proof Camera Ex-M OZC -5- 08-06-2021
The battery may only be charged in a non-hazardous area.
The area must be known as non-hazardous to the user.
After visible damage due to falling from a height above 2 m
or any other type of impact, the camera is no longer to be
considered as explosion proof. Do not use camera
afterwards.
All persons working with the camera must report any alterations to the camera that
may affect safely to the owner without delay.
2.5 Possible misuse
Under NO circumstances the camera may be used in a zone
0. For example the inside of a tank or tank wagon, zone 0
situations are not limited to this example.
Under NO circumstances the camera may be used in a zone
1. For example the direct vicinity of a pump or hose
connection, zone 1 situations are not limited to this example.
DO NOT RUB THE CAMERA WITH A DRY CLOTH
The camera has a non-metallic casing. The surface
resistance of the non-metallic casing is above 10*9
Ω/Square. A warning is attached on the outside to draw
attention to the risk of electrostatic charge. Only clean the
camera with a damp cloth.
To Next Page
Loading...