84
CZ
Calling
Activation of this function requires the smartwatch to paired with
your phone’s Bluetooth.
1. Make sure Bluetooth is on in your phone.
2. Tap on “BT call” on the smartwatch and allow the function
(Fig. 7).
3. Tap on “Bluetooth calling” in the WearPro app (Fig. 3) and pair
the smartwatch with the phone. Always pair the smartwatch
with your phone’s Bluetooth only via the app.
If the function is permitted and the smartwatch is paired with
your phone, you may make and answer calls both on the smart-
watch and your phone.
Up to 20 contacts can be saved on the smartwatch via the app.
Open “Frequent contacts” in the app (Fig. 3) and tap on “+Add
contacts”. Select the desired contact from your list and tap on
“Synchronise” to save.
The calling function can be switched off any time and turned
back on by tapping on “BT call” on the smartwatch (Fig. 7).
EN
To Next Page
Loading...
